Bu Xalıqara Standartlaw Oyışması (ISO) tarafınnan bastırılğan standartlar isemlege. ISO standartlarınıñ tulı häm iñ soñğı versiäse öçen, ISO katalogına möräcäğät itegez.[1]

Standartlar avtorlıq xoquqı turındağı qanunnarı belän yaqlanğan häm küpçelege tüläwle kileş kenä taratıla. ISO häm IEC tarafınnan buldırılğan 1 nçe Urtaq Texnik Komitetı (JTC1) citeştergän yaqınça 300 standartı buşlay taratıla.[2]

ISO 1 – ISO 99

үзгәртү
  • ISO 1:2002 Geometrical Product Specifications (GPS) – Standard reference temperature for geometrical product specification and verification
  • ISO 2:1973 Tekstil – Designation of the direction of twist in yarns and related products
  • ISO 3:1973 Preferred numbers – Series of preferred numbers
  • ISO 4:1997 Mäğlümat häm dokumentlaştıru – Basma isemnäre häm başlam süzlären qısqartu qağidäläre
  • ISO 5 Fotografiä häm grafik texnologiäse – Tığızlıq ülçämnäre.
  • ISO 6:1993 Fotografiä – Black-and-white pictorial still camera negative film/process systems – Determination of ISO speed
  • ISO 7 Pipe threads where pressure-tight joints are made on the threads
  • ISO 8:1977 Dokumentlaştıru – Presentation of periodicals
  • ISO 9:1995 Mäğlümat häm dokumentlaştıru – Transliteration of Cyrillic characters into Latin characters – Slavic and non-Slavic languages
  • ISO 11:1987 Hawa transportı – Ground pressure testing connections for pressure cabins
  • ISO 12:1987 Aerospace – Pipelines – Identification
  • ISO 14:1982 Straight-sided splines for cylindrical shafts with internal centering – Dimensions, tolerances and verification
  • ISO 15:2011 Radial bearings—Boundary dimensions, general plan
  • ISO 16:1975 Akustika – Standard tuning frequency (Standard musical pitch)
  • ISO 17:1973 Guide to the use of preferred numbers and of series of preferred numbers
  • ISO 18:1981 Dokumentlaştıru – Contents list of periodicals
  • ISO 21:1985 Korablar tözeşe – Inland navigation – Cable-lifters for stud-link anchor chains
  • ISO 22:1991 Belt drives – Flat transmission belts and corresponding pulleys – Dimensions and tolerances
  • ISO 23:1993 Kinematograf—Camera usage of 35 mm motion-picture film—Specifications
  • ISO 25:1994 Kinematograf—Camera usage of 16 mm motion-picture film—Specifications
  • ISO 26:1993 Kinematograf—Projector usage of 16 mm motion-picture films for direct front projection—Specifications
  • ISO 28:1976 Kinematograf—Camera usage of 8 mm Type R motion-picture film—Specifications
  • ISO 29:1980 Kinematograf—Projector usage of 8 mm Type R silent motion-picture film for direct front projection—Specifications [Withdrawn without replacement]
  • ISO 31 Quantities and units [withdrawn: replaced with ISO/IEC 80000]
  • ISO 32:1977 Gas cylinders for medical use—Marking for identification of content
  • ISO 34
    • ISO 34-1:2010 Rezin, vulkanlaştırılğan yäki termoplastik—Determination of tear strength—Part 1: Trouser, angle and crescent test pieces
    • ISO 34-2:2011 Rezin, vulkanlaştırılğan yäki termoplastik—Determination of tear strength—Part 2: Small (Delft) test pieces
  • ISO 35:2004 Natural rubber latex concentrate—Determination of mechanical stability
  • ISO 36:2011 Rezin, vulkanlaştırılğan yäki termoplastik—Determination of adhesion to textile fabrics
  • ISO 37:2011 Rezin, vulkanlaştırılğan yäki termoplastik — Determination of tensile stress-strain properties
  • ISO 41:1980 Korablar tözeşe—Inland vessels—Covers for deck openings for pumps [withdrawn without replacement]
  • ISO 43:1976 Hawa transportı—Jacking pads
  • ISO 44:1975 Aerospace—Lever-operated, two-position, ON/OFF switches—Directions of operation
  • ISO 45:1990 Hawa transportı—Pressure refuelling connections
  • ISO 46:1973 Hawa transportı—Fuel nozzle grounding plugs and sockets
  • ISO 48:2010 Rezin, vulkanlaştırılğan yäki termoplastik—Determination of hardness (hardness between 10 IRHD and 100 IRHD)
  • ISO 49:1994 Malleable cast iron fittings threaded to ISO 7-1
  • ISO 50:1977 Metal pipes—Qorıç sockets screwed according to ISO 7 [Withdrawn without replacement]
  • ISO 53:1998 Cylindrical gears for general and heavy engineering—Standard basic rack tooth profile
  • ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering—Modules
  • ISO 55:1977 Seedlac—Specification [Withdrawn without replacement]
  • ISO 57:1975 Bleached lac—Specification [Withdrawn without replacement]
  • ISO 60:1977 Plastmassalar—Determination of apparent density of material that can be poured from a specified funnel
  • ISO 61:1976 Plastmassalar—Determination of apparent density of moulding material that cannot be poured from a specified funnel
  • ISO 62:2008 Plastmassalar—Determination of water absorption
  • ISO 63:1975 Flat transmission belts—Lengths [Withdrawn: Replaced with ISO 22]
  • ISO 65:1981 Carbon Qorıç tubes suitable for screwing in accordance with ISO 7-1
  • ISO 67:1981 Muscovite mica blocks, thins and films—Grading by size [Withdrawn without replacement]
  • ISO 68 ISO general-purpose screw threads – Basic profile
    • ISO 68-1:1998 Metric screw threads
    • ISO 68-2:1998 Inch screw threads
  • ISO 69:1998 Kinematograf—16 mm motion-picture and magnetic film—Cutting and perforating dimensions
  • ISO 70:1981 Kinematograf—35 mm negative photographic sound record on 35 mm motion-picture film—Position and maximum width dimensions
  • ISO 71:1977 Kinematograf—16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film—Positions and dimensions
  • ISO 74:1976 Kinematograf—Image area produced by camera aperture and maximum projectable image area on 8 mm Type R motion-picture film—Positions and dimensions
  • ISO 75 Plastmassalar—Determination of temperature of deflection under load
    • ISO 75-1:2013 Plastmassalar—Determination of temperature of deflection under load—Part 1: General test method
    • ISO 75-2:2013 Plastmassalar—Determination of temperature of deflection under load—Part 2: Plastmassalar and ebonite
    • ISO 75-3:2004 Plastmassalar—Determination of temperature of deflection under load—Part 3: High-strength thermosetting laminates and long-fibre-reinforced Plastmassalar
  • ISO 76:2006 Rolling bearings—Static load ratings
  • ISO 78 Ximiä — Layouts for standards
    • ISO 78-2:1999 Ximiä—Layouts for standards—Part 2: Methods of chemical analysis
    • ISO 78-3:1983 Ximiä—Layouts for standards—Part 3: Standard for molecular absorption spectrometry
    • ISO 78-4:1983 Layouts for standards—Part 4: Standard for atomic absorption spectrometric analysis
  • ISO 82:1974 Qorıç—Tensile testing [Withdrawn: replaced with ISO 6892-1]
  • ISO 83:1976 Qorıç—Charpy impact test (U-notch) [Withdrawn: replaced with ISO 148-1]
  • ISO 86:1974 Qorıç—Tensile testing of sheet and strip less than 3 mm and not less than 0,5 mm thick [Withdrawn: replaced with ISO 6892-1]
  • ISO 89:1974 Qorıç—Tensile testing of wire [Withdrawn: replaced with ISO 6892-1]
  • ISO 90 Light gauge metal containers—Definitions and determination of dimensions and capacities
    • ISO 90-1:1997 Light gauge metal containers—Definitions and determination of dimensions and capacities—Part 1: Open-top cans
    • ISO 90-2:1997 Light gauge metal containers—Definitions and determination of dimensions and capacities—Part 2: General use containers
    • ISO 90-3:2000 Light gauge metal containers—Definitions and determination of dimensions and capacities—Part 3: Aerosol cans
  • ISO 91 Neft ülçämnär cädwälläre
    • ISO 91-1:1992 Neft ülçämnär cädwälläre—Part 1: Tables based on reference temperatures of 15 degrees C and 60 degrees F
    • ISO 91-2:1991 Neft ülçämnär cädwälläre—Part 2: Tables based on a reference temperature of 20 degrees C
  • ISO 92:1976 Tekstil maşinaları häm aksessuarları—Spinning machinery—Definition of side (left or right)
  • ISO 93 Tekstil maşinaları häm aksessuarları—Cylindrical sliver cans
    • ISO 93-1:2006 Tekstil maşinaları häm aksessuarları—Cylindrical sliver cans—Part 1: Main dimensions
    • ISO 93-2:2006 Tekstil maşinaları häm aksessuarları—Cylindrical sliver cans—Part 2: Spring bottoms
  • ISO 94:1982 Tekstil maşinaları häm aksessuarları—Spindle gauges for ring-spinning and ring-doubling frames
  • ISO 96 Tekstil maşinaları häm aksessuarları—Rings and travellers for ring spinning and ring twisting frames
    • ISO 96-1:2009 Tekstil maşinaları häm aksessuarları—Rings and travellers for ring spinning and ring twisting frames—Part 1: Flange rings T and SF and their travellers
    • ISO 96-2:2009 Tekstil maşinaları häm aksessuarları—Rings and travellers for ring spinning and ring twisting frames—Part 2: HZ- and J-rings and their travellers
  • ISO 97:1975 Tekstil maşinaları häm aksessuarları—Rings for spinning, doubling and twisting for ear-shaped travellers
  • ISO 98:2001 Tekstil maşinaları häm aksessuarları—Spinning preparatory and spinning machinery—Main dimensions of coverings for top rollers

ISO 100 – ISO 199

үзгәртү
  • ISO 100:1984 Pulleys for flat transmission belts—Crowns [Withdrawn: replaced with ISO 22]
  • ISO 102:1990 Hawa transportı—Gravity filling orifices
  • ISO 104:2002 Rolling bearings—Thrust bearings—Boundary dimensions, general plan
  • ISO 105 Tektil — Töslär totrıqlılığı testları
    • ISO 105-A01:2010 Part A01: General principles of testing
    • ISO 105-A02:1993 Part A02: Grey scale for assessing change in colour
    • ISO 105-A03:1993 Part A03: Grey scale for assessing staining
    • ISO 105-A04:1989 Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics
    • ISO 105-A05:1996 Part A05: Instrumental assessment of change in colour for determination of grey scale rating
    • ISO 105-A06:1995 Part A06: Instrumental determination of 1/1 standard depth of colour
    • ISO 105-A08:2001 Part A08: Süzlek used in colour measurement
    • ISO 105-A11:2012 Part A11: Determination of colour fastness grades by digital imaging techniques
    • ISO 105-B01:1994 Part B01: Colour fastness to light: Daylight
    • ISO 105-B02:2013 Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
    • ISO 105-B03:1994 Part B03: Colour fastness to weathering: Outdoor exposure
    • ISO 105-B04:1994 Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test
    • ISO 105-B05:1993 Part B05: Detection and assessment of photochromism
    • ISO 105-B06:1998 Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
    • ISO 105-B07:2009 Part B07: Colour fastness to light of Tekstil wetted with artificial perspiration
    • ISO 105-B08:1995 Part B08: Quality control of blue wool reference materials 1 to 7
    • ISO 105-B10:2011 Part B10: Artificial weathering—Exposure to filtered xenon-arc radiation
    • ISO 105-C06:2010 Part C06: Colour fastness to domestic and commercial laundering
    • ISO 105-C07:1999 Part C07: Colour fastness to wet scrubbing of pigment printed Tekstil
    • ISO 105-C08:2010 Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator
    • ISO 105-C09:2001 Part C09: Colour fastness to domestic and commercial laundering—Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator
    • ISO 105-C10:2006 Part C10: Colour fastness to washing with soap or soap and soda
    • ISO 105-C12:2004 Part C12: Colour fastness to industrial laundering
    • ISO 105-D01:2010 Part D01: Colour fastness to drycleaning using perchloroethylene solvent
    • ISO 105-D02:1993 Part D02: Colour fastness to rubbing: Organic solvents
    • ISO 105-E01:2013 Part E01: Colour fastness to water
    • ISO 105-E02:2013 Part E02: Colour fastness to sea water
    • ISO 105-E03:2010 Part E03: Colour fastness to chlorinated water (swimming-pool water)
    • ISO 105-E04:2013 Part E04: Colour fastness to perspiration
    • ISO 105-E05:2010 Part E05: Colour fastness to spotting: Acid
    • ISO 105-E06:2006 Part E06: Colour fastness to spotting: Alkali
    • ISO 105-E07:2010 Part E07: Colour fastness to spotting: Water
    • ISO 105-E08:1994 Part E08: Colour fastness to hot water
    • ISO 105-E09:2010 Part E09: Colour fastness to potting
    • ISO 105-E10:1994 Part E10: Colour fastness to decatizing
    • ISO 105-E11:1994 Part E11: Colour fastness to steaming
    • ISO 105-E12:2010 Part E12: Colour fastness to milling: Alkaline milling
    • ISO 105-E13:1994 Part E13: Colour fastness to acid-felting: Severe
    • ISO 105-E14:1994 Part E14: Colour fastness to acid-felting: Mild
    • ISO 105-E16:2006 Part E16: Colour fastness to water spotting on upholstery fabrics
    • ISO 105-F01:2001 Part F01: Specification for wool adjacent fabric
    • ISO 105-F02:2009 Part F02: Specification for cotton and viscose adjacent fabrics
    • ISO 105-F03:2001 Part F03: Specification for polyamide adjacent fabric
    • ISO 105-F04:2001 Part F04: Specification for polyester adjacent fabric
    • ISO 105-F05:2001 Part F05: Specification for acrylic adjacent fabric
    • ISO 105-F06:2000 Part F06: Specification for silk adjacent fabric
    • ISO 105-F07:2001 Part F07: Specification for secondary acetate adjacent fabric
    • ISO 105-F09:2009 Part F09: Specification for cotton rubbing cloth
    • ISO 105-F10:1989 Part F10: Specification for adjacent fabric: Multifibre
    • ISO 105-G01:1993 Part G01: Colour fastness to nitrogen oxides
    • ISO 105-G02:1993 Part G02: Colour fastness to burnt-gas fumes
    • ISO 105-G03:1993 Part G03: Colour fastness to ozone in the atmosphere
    • ISO 105-G04:1989 Part G04: Colour fastness to oxides of nitrogen in the atmosphere at high humidities
    • ISO 105-J01:1997 Part J01: General principles for measurement of surface colour
    • ISO 105-J02:1997 Part J02: Instrumental assessment of relative whiteness
    • ISO 105-J03:2009 Part J03: Calculation of colour differences
    • ISO 105-J05:2007 Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCON02)
    • ISO 105-N01:1993 Part N01: Colour fastness to bleaching: Hypochlorite
    • ISO 105-N02:1993 Part N02: Colour fastness to bleaching: Peroxide
    • ISO 105-N03:1993 Part N03: Colour fastness to bleaching: Sodium chlorite (mild)
    • ISO 105-N04:1993 Part N04: Colour fastness to bleaching: Sodium chlorite (severe)
    • ISO 105-N05:1993 Part N05: Colour fastness to stoving
    • ISO 105-P01:1993 Part P01: Colour fastness to dry heat (excluding pressing)
    • ISO 105-P02:2002 Part P02: Colour fastness to pleating: Steam pleating
    • ISO 105-S01:1993 Part S01: Colour fastness to vulcanization: Hot air
    • ISO 105-S02:1993 Part S02: Colour fastness to vulcanization: Sulfur monochloride
    • ISO 105-S03:1993 Part S03: Colour fastness to vulcanization: Open steam
    • ISO 105-X01:1993 Part X01: Colour fastness to carbonizing: Aluminium chloride
    • ISO 105-X02:1993 Part X02: Colour fastness to carbonizing: Sulfuric acid
    • ISO 105-X04:1994 Part X04: Colour fastness to mercerizing
    • ISO 105-X05:1994 Part X05: Colour fastness to organic solvents
    • ISO 105-X06:1994 Part X06: Colour fastness to soda boiling
    • ISO 105-X07:1994 Part X07: Colour fastness to cross-dyeing: Wool
    • ISO 105-X08:1994 Part X08: Colour fastness to degumming
    • ISO 105-X09:1993 Part X09: Colour fastness to formaldehyde
    • ISO 105-X10:1993 Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings
    • ISO 105-X11:1994 Part X11: Colour fastness to hot pressing
    • ISO 105-X12:2001 Part X12: Colour fastness to rubbing
    • ISO 105-X13:1994 Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting
    • ISO 105-X14:1994 Part X14: Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurate
    • ISO 105-X16:2001 Part X16: Colour fastness to rubbing—Small areas
    • ISO 105-X18:2007 Part X18: Assessment of the potential to phenolic yellowing of materials
    • ISO 105-Z01:1993 Part Z01: Colour fastness to metals in the dye-bath: Chromium salts
    • ISO 105-Z02:1993 Part Z02: Colour fastness to metals in the dye-bath: Iron and copper
    • ISO 105-Z03:1996 Part Z03: Intercompatibility of basic dyes for acrylic fibres
    • ISO 105-Z04:1995 Part Z04: Dispersibility of disperse dyes
    • ISO 105-Z05:1996 Part Z05: Determination of the dusting behaviour of dyes
    • ISO 105-Z06:1998 Part Z06: Evaluation of dye and pigment migration
    • ISO 105-Z07:1995 Part Z07: Determination of application solubility and solution stability of water-soluble dyes
    • ISO 105-Z08:1995 Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes
    • ISO 105-Z09:1995 Part Z09: Determination of cold water solubility of water-soluble dyes
    • ISO 105-Z10:1997 Part Z10: Determination of relative colour strength of dyes in solution
    • ISO 105-Z11:1998 Part Z11: Evaluation of speckiness of colorant dispersions
  • ISO 108:1976 Tekstil maşinaları häm aksessuarları—Weaving looms—Definition of left and right sides
  • ISO 109:1982 Tekstil maşınaları —Working widths of weaving machines
  • ISO 110:1978 Tekstil maşinaları häm aksessuarları—Cones for yarn winding (cross wound) -- Half angle of the cone 9 degrees 15' [Withdrawn without replacement]
  • ISO 111:1978 Tekstil maşinaları häm aksessuarları—Cones for yarn winding (cross wound) -- Half angle of the cone 4 degrees 20' [Withdrawn: Replaced with ISO 8489-3]
  • ISO 112:1983 Tekstil maşinaları häm aksessuarları—Cones for yarn winding (cross wound) -- Half angle of the cone 3 degrees 30' [Withdrawn: Replaced with ISO 8489-2]
  • ISO 113:2010 Rolling bearings—Plummer block housings—Boundary dimensions
  • ISO 114:1980 99.8 Unalloyed magnesium ingots—Chemical composition [Withdrawn: Replaced by ISO 8287]
  • ISO 115:2003 Unalloyed aluminium ingots for remelting—Classification and composition
  • ISO 119:1977 Plastmassalar—Phenol-formaldehyde mouldings—Determination of free phenols—Iodometric method
  • ISO 120:1977 Plastmassalar—Phenol-formaldehyde mouldings—Determination of free ammonia and ammonium compounds—Colorimetric comparison method
  • ISO 121:1980 Magnesium-aluminium-zinc alloy ingots and alloy castings—Chemical composition and mechanical properties of sand cast reference test bars [Withdrawn: replaced by ISO 16220]
  • ISO 123:2001 Rezin lateksı —Sampling
  • ISO 124:2011 Lateks, rezin—Determination of total solids content
  • ISO 125:2011 Tabiği rezin lateks kontsentratı —Determination of alkalinity
  • ISO 126:2005 Tabiği rezin lateks kontsentratı —Determination of dry rubber content
  • ISO 127:2012 Rezin, Tabiği lateks kontsentratı —Determination of KOH number
  • ISO 128 Texnik räsemnär —General principles of presentation
  • ISO 129
    • ISO 129-1:2004 Texnik räsemnär—Indication of dimensions and tolerances—Part 1: General principles
    • ISO 129-4:2013 Texnik produktlar dokumentlaştırıluı (TPD) -- Indication of dimensions and tolerances—Part 4: Dimensioning of Korablar tözeşe drawings
  • ISO 131:1979 Akustika—Expression of physical and subjective magnitudes of sound or noise in air [Withdrawn without replacement]
  • ISO 132:2011 Rezin, vulkanlaştırılğan yäki termoplastik—Determination of flex cracking and crack growth (De Mattia)
  • ISO 133:1983 Rezin, vulkanlaştırılğan—Determination of crack growth (De Mattia) [Withdrawn: Replaced with ISO 132]
  • ISO 136:1972 Qorıç—Simple torsion testing of wire [Withdrawn replaced by ISO 7800]
  • ISO 137:1975 Wool—Determination of fibre diameter—Projection microscope method
  • ISO 139:2005 Tekstil—Standard atmospheres for conditioning and testing
  • ISO 140 Akustika—Measurement of sound insulation in buildings and of building elements
    • ISO 140-2:1991 Part 2: Determination, verification and application of precision data
    • ISO 140-4:1998 Part 4: Field measurements of airborne sound insulation between rooms
    • ISO 140-5:1998 Part 5: Field measurements of airborne sound insulation of façade elements and façades
    • ISO 140-7:1998 Part 7: Field measurements of impact sound insulation of floors
    • ISO 140-14:2004 Part 14: Guidelines for special situations in the field
    • ISO 140-18:2006 Part 18: Laboratory measurement of sound generated by rainfall on building elements
  • ISO 141:1976 Tekstil maşinaları häm aksessuarları—Pirn winders and cross winders—Definition of left and right sides
  • ISO 142:1976 Tekstil maşinaları häm aksessuarları—Weaving preparatory machines—Definition of left and right sides
  • ISO 143:1977 Tekstil maşinaları häm aksessuarları—Weft pirns for automatic looms [Withdrawn without replacement]
  • ISO 144:1973 Qorıç—Reverse bend testing of wire [Withdrawn: replaced with ISO 7801]
  • ISO 146:1984 Metallik materiallar—Hardness test—Verification of Vickers hardness testing machines HV 0,2 to HV 100 [Withdrawn replaced with ISO 6507-2]
    • ISO 146-2:1993 Metallik materiallar—Verification of Vickers hardness testing machines—Part 2: Less than HV 0,2 [Withdrawn replaced with ISO 6507-2]
  • ISO 148 Metallik materiallar—Charpy pendulum impact test
    • ISO 148-1:2009 Part 1: Test method
    • ISO 148-2:2008 Part 2: Verification of testing machines
    • ISO 148-3:2008 Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
  • ISO 150:2006 Raw, refined and boiled linseed oil for paints and varnishes—Specifications and methods of test
  • ISO 155:1998 Belt drives—Pulleys—Limiting values for adjustment of centres
  • ISO 156:1982 Metallik materiallar—Hardness test—Verification of Brinell hardness testing machines [Withdrawn replaced by ISO 6506-2]
  • ISO 157:1996 Taşkümer—Determination of forms of sulfur
  • ISO 160:1980 Asbestos-cement pressure pipes and joints [Withdrawn without replacement]
  • ISO 161 ThermoPlastmassalar pipes for the conveyance of fluids—Nominal outside diameters and nominal pressures
    • ISO 161-1:1996 Part 1: Metric series
    • ISO 161-2:1996 Part 2: Inch-based series
  • ISO 162:1985 Kinematograf—Head gaps and sound records for three-, four-, or six-track magnetic sound records on 35 mm and single-track on 17,5 mm motion-picture film containing no picture—Positions and width dimensions
  • ISO 171:1980 Plastmassalar—Determination of bulk factor of moulding materials
  • ISO 172:1978 Plastmassalar—Phenol-formaldehyde mouldings—Detection of free ammonia
  • ISO 174:1974 Plastmassalar—Homopolymer and copolymer resins of vinyl chloride—Determination of viscosity number in dilute solution [Withdrawn replaced by ISO 1628-2]

ISO 200 – ISO 999

үзгәртү
  • ISO 216:2007 Yazu öçen käğäz häm saylanğan basma matdälär sıynıfları – Trimmed sizes – A and B series, and indication of machine direction
  • ISO 226:2003 Akustika – Normal equal-loudness-level contours
  • ISO 228 Pipe threads where pressure-tight joints are not made on the threads
  • ISO 233 Mäğlümat häm dokumentlaştıru – Transliteration of Arabic characters into Latin characters
  • ISO 259 Mäğlümat häm dokumentlaştıru – Transliteration of Hebrew characters into Latin characters
  • ISO 261 ISO general purpose metric screw threads – General plan
  • ISO 262 ISO general purpose metric screw threads – Selected sizes for screws, bolts and nuts
  • ISO 286-1 Geometrical product specifications (GPS) – ISO code system for tolerances on linear sizes – Part 1: Basis of tolerances, deviations and fits
  • ISO 286-2 Geometrical product specifications (GPS) – ISO code system for tolerances on linear sizes – Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
  • ISO 361 Ğadi ionlaştıruçı nurlanış simvolı
  • ISO 500 Awıl xucalığı traktorları – Rear-mounted power take-off types 1, 2 and 3
  • ISO 518:2006 Fotografiä – Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units – Specification
  • ISO 519:1992 Fotografiä – Hand-held cameras – Flash-connector dimensions
  • ISO 639 Tel isemnäre kodları
    • ISO 639-1 Alpha-2 code
    • ISO 639-2 Alpha-3 code
    • ISO 639-3 Alpha-3 code for comprehensive coverage of languages
    • ISO 639-4 General principles of coding of the representation of names of languages and related entities, and application guidelines
    • ISO 639-5 Alpha-3 code for language families and groups
    • ISO 639-6 Alpha-4 code for comprehensive coverage of language variants
  • ISO/IEC 646 Mäğlümat texnologiäläre – ISO 7-bit coded character set for information interchange
  • ISO 657 Hot-rolled Qorıç sections
  • ISO 668 Series 1 freight containers – Classification, dimensions and ratings
  • ISO 690 Mäğlümat häm dokumentlaştıru – Guidelines for bibliographic references and citations to information resources
  • ISO 704 Terminologiä eşe – Mäsläklär häm metodlar
  • ISO 732 Fotografiä – 120-size and 220-size films – Dimensions
  • ISO 764 Horology – Magnetic resistant watches
  • ISO 760:1978 Determination of water - Karl Fischer method (General method)
  • ISO 787 General methods of test for pigments and extenders
    • ISO 787-9:1981 Determination of pH value of an aqueous suspension
  • ISO 838 Käğäz – Gomumi berketü öçen tişeklär – Spetsifikatsiälär
  • ISO 843:1997 Mäğlümat häm dokumentlaştıru – Conversion of Greek characters into Latin characters
  • ISO 860 Terminologiä eşe – Harmonization of concepts and terms
  • ISO 898 Mechanical properties of fasteners made of carbon Qorıç and alloy Qorıç[Note 1]
  • ISO 965 ISO general purpose metric screw threads – Tolerances
  • ISO 999 Mäğlümat häm dokumentlaştıru – Guidelines for the content, organization, and presentation of indexes

ISO 1000 – ISO 4999

үзгәртү
  • ISO 1000 SI units and recommendations for the use of their multiples and of certain other units [withdrawn 2009-11-17]
  • ISO 1004 Information processing – Magnetic ink character recognition – Print specifications
  • ISO 1007 Fotografiä135-size film and magazine – Specifications
  • ISO 1101 Geometrical Product Specifications (GPS) – Geometrical tolerancing – Tolerances of form, orientation, location and run-out
  • ISO 1222 FotografiäTripod connections
  • ISO 1268 Fibre-reinforced Plastmassalar – Methods of producing test plates
  • ISO 1402 Rezin häm plastmassadan yasalğan şlanglar häm şlang sistemaları – Hidrostatik testlar
  • ISO/IEC 1539 Mäğlümat texnologiäläreProgrammalaw telläreFortran
  • ISO 1629 Rezin häm latekslar – Nomenklatura
  • ISO 1663 Rigid cellular Plastmassalar – Determination of water vapour transmission properties
  • ISO 1745 Information processing – Basic mode control procedures for data communication systems
  • ISO 1750 Pestitsidlar häm başqa agroximikatlar – Ğomumi isemnäre
  • ISO 1928 Solid mineral fuels – Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value
  • ISO/IEC 2022 Mäğlümat texnologiäläre – Character code structure and extension techniques
  • ISO 2108 Mäğlümat häm dokumentlaştıru – International standard book number (ISBN)
  • ISO 2145 Dokumentlaştıru – Numbering of divisions and subdivisions in written documents
  • ISO 2162 Technical product Dokumentlaştıru – Springs
    • ISO 2162-1 Simplified representation
    • ISO 2162-2 Presentation of data for cylindrical helical compression springs
  • ISO 2171 Cereals, pulses and by-products – Determination of ash yield by incineration
  • ISO 2240:2003 Fotografiä – Colour reversal camera films – Determination of ISO speed
  • ISO 2533 Standart atmosfera basımı
  • ISO 2692 Geometrical product specifications (GPS) – Geometrical tolerancing – Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
  • ISO 2709 Mäğlümat häm dokumentlaştıru – Format for information exchange
  • ISO 2768 General tolerances
    • ISO 2768-1 Tolerances for linear and angular dimensions without individual tolerance indications
    • ISO 2768-2 Geometrical tolerances for features without individual tolerance indications
  • ISO 2852 Stainless Qorıç clamp pipe couplings for the food industry
  • ISO 3002 Basic quantities in cutting and grinding
  • ISO 3082 Timer rudaları – Sampling and sample preparation procedures
  • ISO 3098 Technical product Dokumentlaştıru – Lettering
  • ISO 3103 Çäy – Preparation of liquor for use in sensory tests
  • ISO 3166 İllär häm alarnıñ büleneşlär kodları.
  • ISO 3297 Mäğlümat häm dokumentlaştıru – International standard serial number (ISSN)
  • ISO 3394 Dimensions of rigid rectangular packages – Transport packages
  • ISO 3506 Mechanical properties of corrosion-resistant [[stainless Qorıç]] fasteners
  • ISO 3534 Statistika – Süzlek hä simvollar
    • ISO 3534-1 General statistical terms and terms used in probability
    • ISO 3534-2 Applied statistics
    • ISO 3534-3 Design of experiments
    • ISO 3534-4 Survey sampling
  • ISO 3536 Avtomobillär – Safety glazing materials – Süzlek
  • ISO 3537 Avtomobillär – Safety glazing materials – Mechanical tests
  • ISO 3538 Avtomobillär – Safety glazing materials – Test methods for optical properties
  • ISO 3601 Fluid power systems – O-rings
    • ISO 3601-1 Inside diameters, cross-sections, tolerances and designation codes
    • ISO 3601-2 Housing dimensions for general applications
    • ISO 3601-3 Quality acceptance criteria
    • ISO 3601-4 Anti-extrusion rings (back-up rings)
    • ISO 3601-5 Suitability of elastomeric materials for industrial applications
  • ISO 3602 Dokumentlaştıru – Romanization of Japanese (kana script)
  • ISO 3632 Spices – Saffron (Crocus sativus L.)[Note 1]
  • ISO 3635:1981 Size designation of clothes – Definitions and body measurement procedure
  • ISO 3676 Packaging – Unit load sizes – Dimensions
  • ISO 3864 Graphical symbols – Safety colours and safety signs
  • ISO 3901 Mäğlümat häm dokumentlaştıru – International Standard Recording Code (ISRC)
  • ISO 3977 Gaz turbinnarı – Procurement
  • ISO 4074 Natural latex rubber condoms – Requirements and test methods
  • ISO 4157 Tözeleş räsemnäre – Designation systems
  • ISO 4165 Avtomobillär — Electrical connections — Double-pole connection
  • ISO 4179 Ductile iron pipes and fittings for pressure and non-pressure pipelines – Cement mortar lining
  • ISO 4217 Codes for the representation of currencies and funds
  • ISO 4314 Surface active agents — Determination of free alkalinity or free acidity — Titrimetric method
  • ISO 4578 Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method
  • ISO 4582 Plastmassalar — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
  • ISO 4587 Adhesives — Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
  • ISO 4628 Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance
    • ISO 4628-1 General introduction and designation system
    • ISO 4628-2 Assessment of degree of blistering
    • ISO 4628-3 Assessment of degree of rusting
    • ISO 4628-4 Assessment of degree of cracking
    • ISO 4628-5 Assessment of degree of flaking
    • ISO 4628-6 Assessment of degree of chalking by tape method
    • ISO 4628-7 Assessment of degree of chalking by velvet method
    • ISO 4628-8 Assessment of degree of delamination and corrosion around a scribe
    • ISO 4628-10 Assessment of degree of filiform corrosion
  • ISO/IEC 4873:1991 Mäğlümat texnologiäläre – ISO 8-bit code for information interchange – Structure and rules for implementation
  • ISO 4892 Plastmassalar – Methods of exposure to laboratory light sources

ISO 5000 – ISO 9999

үзгәртү

ISO 10000 – ISO 14999

үзгәртү
  • ISO 10001:2007 Sıyfat menedjmentı – Customer satisfaction – Guidelines for codes of conduct for organizations
  • ISO 10002:2014 Sıyfat menedjmentı – Customer satisfaction – Guidelines for complaints handling in organizations
  • ISO 10003:2007 Sıyfat menedjmentı – Customer satisfaction – Guidelines for dispute resolution external to organizations
  • ISO 10004:2008 Sıyfat menedjmentı – Customer satisfaction – Guidelines for monitoring and measuring
  • ISO 10005:2005 Sıyfat menedjmentı systems – Guidelines for quality plans
  • ISO 10006:2003 Sıyfat menedjmentı systems – Guidelines for Sıyfat menedjmentı in projects
  • ISO 10007:2003 Sıyfat menedjmentı systems – Guidelines for configuration management
  • ISO 10012:2003 Measurement management systems – Requirements for measurement processes and measuring equipment
  • ISO/TR 10013:2001 Guidelines for Sıyfat menedjmentı system Dokumentlaştıru
  • ISO 10014:2006 Sıyfat menedjmentı – Guidelines for realizing financial and economic benefits
  • ISO 10015:1999 Sıyfat menedjmentı – Guidelines for training
  • ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000
  • ISO 10018:2012 Sıyfat menedjmentı – Guidelines on people involvement and competence
  • ISO 10019:2005 Guidelines for the selection of Sıyfat menedjmentı system consultants and use of their services
  • ISO/IEC 10021 Mäğlümat texnologiäläre – Message Handling Systems (MHS)
  • ISO/IEC 10026 Mäğlümat texnologiäläreOpen Systems Interconnection
  • ISO 10077 Thermal performance of windows, doors and shutters – Calculation of thermal transmittance
  • ISO/IEC 10089 Mäğlümat texnologiäläre – 130 mm rewritable optical disk cartridge for information interchange
  • ISO/IEC 10116 Mäğlümat texnologiäläre – Security techniques – Modes of operation for an n-bit block cipher
  • ISO/IEC 10118 Mäğlümat texnologiäläre – Security techniques – Hash-functions
  • ISO 10160 Mäğlümat häm dokumentlaştıru – Open Systems Interconnection – Interlibrary Loan Application Service Definition
  • ISO 10161 Mäğlümat häm dokumentlaştıru – Open Systems Interconnection – Interlibrary Loan Application Protocol Specification
  • ISO/IEC 10164 Mäğlümat texnologiäläre – Open Systems Interconnection – Systems Management
  • ISO/IEC 10179:1996 Mäğlümat texnologiäläre – Processing languages – Document Style Semantics and Specification Language (DSSSL)
  • ISO/IEC 10206 Mäğlümat texnologiäläreProgrammalaw telläre – Kiñäytelgän Paskal
  • ISO 10211 Thermal bridges in building construction – Heat flows and surface temperatures – Detailed calculations
  • ISO 10218 Robots and robotic devices – Safety requirements for industrial robots
  • ISO/IEC 10279 Mäğlümat texnologiäläreProgrammalaw telläre – Full BASIC
  • ISO 10303 Industrial automation systems and integration – Product data representation and exchange
  • ISO 10380 Pipework — Corrugated metal hoses and hose assemblies
  • ISO 10383 Securities and related financial instruments – Codes for exchanges and market identification (MIC)
  • ISO 10456 Building materials and products – Hygrothermal properties – Tabulated design values and procedures for determining declared and design thermal values
  • ISO 10487 Passenger cars – Connections for car radios[Note 1]
  • ISO 10555 Sterile, single-use intravascular catheters
  • ISO 10579 Geometrical product specifications (GPS) – Dimensioning and tolerancing – Non-rigid parts
  • ISO 10628 Flow diagrams for process plants
  • ISO/IEC 10646 Mäğlümat texnologiäläreUniversal Coded Character Set (UCS)
  • ISO 10664 Hexalobular internal driving feature for bolts and screws – Torx screw head
  • ISO/IEC 10746 Mäğlümat texnologiäläre - Open distributed processing
  • ISO 10957 Mäğlümat häm dokumentlaştıru – International standard music number (ISMN)
  • ISO 10962 Securities and related financial instruments – Classification of Financial Instruments (CFI code)
  • ISO 10993 Biological evaluation of Meditsina priborları
  • ISO 11064 Ergonomic design of control centres
    • ISO 11064-1:2000 Principles for the design of control centres
    • ISO 11064-2:2000 Principles for the arrangement of control suites
    • ISO 11064-3:1999 Control room layout ISO 11064-3:1999/Cor 1:2002
    • ISO 11064-4:2004 Layout and dimensions of workstations
    • ISO 11064-5:2008 Displays and controls
    • ISO 11064-6:2005 Environmental requirements for control centres
    • ISO 11064-7:2006 Principles for the evaluation of control centres
  • ISO 11120 Gas cylinders—Refillable seamless Qorıç tubes for compressed gas transport, of water capacity between 150 l and 3000 l -- Design construction and testing
  • ISO 11135:2014 Sterilization of health-care products—Ethylene oxide—Requirements for the development, validation and routine control of a sterilization process for Meditsina priborları
  • ISO 11137 Sterilization of health care products – Radiation
  • ISO 11170:2003 Hydraulic fluid power – Filter elements – Sequence of tests for verifying performance characteristics
  • ISO 11171:2010 Hydraulic fluid power – Calibration of automatic particle counters for liquids
  • ISO/IEC 11172 Mäğlümat texnologiäläre – Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s
  • ISO/IEC 11179 Mäğlümat texnologiäläre – Metadata registries (MDR)
  • ISO 11357 Plastmassalar – Differential scanning calorimetry (DSC)
    • ISO 11357-1:2009 General principles
    • ISO 11357-2:2013 Determination of glass transition temperature and glass transition step height
    • ISO 11357-3:2011 Determination of temperature and enthalpy of melting and crystallization
    • ISO 11357-4:2005 Determination of specific heat capacity
    • ISO 11357-5:2013 Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
    • ISO 11357-6:2008 Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
    • ISO 11357-7:2002 Determination of crystallization kinetics
  • ISO/IEC 11404 Mäğlümat texnologiäläre – General-Purpose Datatypes (GPD)
  • ISO 11446:2004 Avtomobillär – Connectors for the electrical connection of towing and towed vehicles – 13-pole connectors for vehicles with 12 V nominal supply voltage
  • ISO 11469:2000 Plastmassalar – Generic identification and marking of Plastmassalar products
  • ISO/IEC 11578:1996 [[Mäğlümat texnologiäläre]] – Open Systems InterconnectionRemote procedure call (RPC)
  • ISO 11783 Traktorlar häm awıl xucalığı häm urmançılıq maşinaları – Serial control and communications data network
  • ISO/IEC 11801 Mäğlümat texnologiäläre – Generic cabling for customer premises
  • ISO 11898 Avtomobillär – Controller area network (CAN)
  • ISO 12006 Building construction – Organization of information about construction works
  • ISO/IEC 12207 Systems and software engineering – Software life cycle processes
  • ISO 12100 Safety of machinery – General principles for design – Risk assessment and risk reduction
  • ISO 12639 Graphic technology – Prepress digital data exchange – Tag image file format for image technology (TIFF/IT)
  • ISO 12641 Graphic technology – Prepress digital data exchange – Colour targets for input scanner calibration
  • ISO/TS 12805:2011 Nanotexnologiälär – Materials specifications – Guidance on specifying nano-objects
  • ISO 12859/TR Intelligent transport systems – System Arxitektura – Privacy aspects in ITS standards and systems
  • ISO 12944 Buyawlar häm varnishes – Corrosion protection of Qorıç structures by protective paint systems
  • ISO 13007 Keramik plitkalar – Grouts and adhesives
    • ISO 13007-1:2014 Terms, definitions and specifications for adhesives
    • ISO 13007-2:2010 Test methods for adhesives
    • ISO 13007-3:2010 Terms, definitions and specifications for grouts
    • ISO 13007-4:2013 Test methods for grouts
  • ISO/TR 13121:2011 Nanotexnologiälär – Nanomaterial risk evaluation
  • ISO 13239 Mäğlümat texnologiäläre – Telecommunications and information exchange between systems – High-level data link control (HDLC) procedures
  • ISO/IEC 13249 Mäğlümat texnologiäläre – Database languages – SQL multimedia and application
  • ISO/IEC 13250 Mäğlümat texnologiäläreTopic Maps[Note 1]
  • ISO 13320:2009 Kisäkçeklär külämnären analizlaw - Lazer diffraktsiäse metodı
  • ISO/IEC 13346 Mäğlümat texnologiäläre – Volume and file structure of write-once and rewritable media using non-sequential recording for information interchange
  • ISO 13370 Thermal performance of buildings – Heat transfer via the ground – Calculation methods
  • ISO 13406-2:2001 Ergonomic requirements for work with visual displays based on flat panels – Part 2: Ergonomic requirements for flat panel displays [withdrawn 2008-11-14]
  • ISO 13450 Fotografiä110-size cartridge, film and backing paper – Dimensions
  • ISO 13485:2003 Meditsina priborları – Sıyfat menedjmentı systems – Requirements for regulatory purposes
  • ISO/IEC 13490 Mäğlümat texnologiäläre – Volume and file structure of read-only and write-once compact disk media for information interchange
  • ISO 13567 Technical product Dokumentlaştıru – Organization and naming of layers for CAD
  • ISO/IEC 13568:2002 Mäğlümat texnologiäläreZ formal specification notation – Syntax, type system and semantics
  • ISO 13577 Industrial furnaces and associated processing equipment - Safety
    • ISO 13577-1 General requirements
  • ISO 13579 Industrial furnaces and associated processing equipment - Method of measuring energy balance and calculating efficiency
    • ISO 13579-1 General methodology
    • ISO 13579-2 Reheating furnaces for qorıç
    • ISO 13579-3 Batch-type aluminium melting furnaces
    • ISO 13579-4 Furnaces with protective or reactive atmosphere
  • ISO 13586:2000 Plastmassalar - Determination of fracture toughness (GIC and KIC) -- Linear elastic fracture mechanics (LEFM) approach
  • ISO 13616 Finans xezmätläre – International bank account number (IBAN)
  • ISO 13628 Neft and tabiği gaz industries – Design and operation of subsea production systems
    • ISO 13628-1 General requirements and recommendations
    • ISO 13628-2 Unbonded flexible pipe systems for subsea and marine applications
    • ISO 13628-3 Through flowline (TFL) systems
    • ISO 13628-4 Subsea wellhead and tree equipment
    • ISO 13628-5 Subsea umbilicals
    • ISO 13628-6 Subsea production control systems
    • ISO 13628-7 Completion/workover riser systems
    • ISO 13628-8 Remotely Operated Vehicle (ROV) interfaces on subsea production systems
    • ISO 13628-9 Remotely Operated Tool (ROT) intervention systems
    • ISO 13628-10 Specification for bonded flexible pipe
    • ISO 13628-11 Flexible pipe systems for subsea and marine applications
  • ISO 13715 Technical drawings—Edges of undefined shape—Süzlek and indications
  • ISO 13849 Safety of machinery – Safety related parts of control systems
  • ISO/IEC 13818 Mäğlümat texnologiäläre – Generic coding of moving pictures and associated audio information
  • ISO 13837 Avtomobillär – Safety glazing materials – Method for the determination of solar transmittance
  • ISO 14000 Environmental management systems [This is a set of standards, rather than a single standard.]
  • ISO 14001:2004 Environmental management systems – Requirements with guidance for use
  • ISO 14004:2004 Environmental management systems – General guidelines on principles, systems and support techniques
  • ISO 14031 Environmental management - Environmental performance evaluation – Guidelines
  • ISO 14050 Environmental management – Süzlek
  • ISO 14051 Environmental management – Material flow cost accounting - General framework
  • ISO 14064 Greenhouse gases
  • ISO 14155:2011 Clinical investigation of Meditsina priborları for human subjects – Good clinical practice
  • ISO 14223 Radiofrequency Калып:Sic identification of animals – Advanced transponders
  • ISO 14224 Neft, nefteximiä häm tabiği gaz sänäğäte - Collection and exchange of reliability and maintenance data for equipment
  • ISO 14230 Avtomobillär – Diagnostic systems – Keyword Protocol 2000
  • ISO 14405-1 Geometrical product specifications (GPS) – Dimensional tolerancing – Part 1: Linear sizes
  • ISO/IEC 14443 Identification cards – Contactless integrated circuit cards – Proximity cards
  • ISO/IEC 14462 - Open-EDI Reference Model
  • ISO/IEC 14496 Mäğlümat texnologiäläre – Coding of audio-visual objects
  • ISO 14641 Elektronik arxivlaw
    • ISO 14641-1:2012 Specifications concerning the design and the operation of an information system for electronic information preservation
  • ISO 14644 Cleanrooms and associated controlled environments
  • ISO/IEC 14651 Mäğlümat texnologiäläre – International string ordering and comparison – Method for comparing character strings and description of the common template tailorable ordering
  • ISO 14698 Cleanrooms and associated controlled environments – Biocontamination control
    • ISO 14698-1 General principles and methods
    • ISO 14698-2 Evaluation and interpretation of biocontamination data
  • ISO/IEC 14750 Mäğlümat texnologiäläre – Open Distributed Processing – Interface Definition Language
  • ISO/IEC 14755 Mäğlümat texnologiäläre – Input methods to enter characters from the repertoire of ISO/IEC 10646 with a keyboard or other input device
  • ISO 14801 Stomatologiäİmplantlar – Dynamic fatigue test for endosseous dental implants
  • ISO 14855-1 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions – Method by analysis of evolved carbon dioxide
  • ISO 14855-1:2005 General method
  • ISO 14855-2:2007 Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
  • ISO/IEC 14882 Programmalaw telläreC++
  • ISO 14915 Software ergonomics for multimedia user interfaces
    • ISO 14915-1:2002 Design principles and framework
    • ISO 14915-2:2003 Multimedia navigation and control
    • ISO 14915-3:2002 Media selection and combination
  • ISO 14971:2007 Meditsina priborları – Application of Risk menedjment to Meditsina priborları
  • ISO/IEC 14977 Mäğlümat texnologiäläre – Syntactic metalanguage – Extended BNF

ISO 15000 – ISO 19999

үзгәртү

ISO 20000 – ISO 29999

үзгәртү

ISO 30000 – ISO 39999

үзгәртү

ISO 50000 - ISO 59999

үзгәртү
  • ISO 50001:2011 Energy management systems – Requirements with guidance for use
  • ISO 55000:2014 Asset management – Overview, principles and terminology
  • ISO/IEC 80000 Quantities and units
  • ISO/TS 80004 Nanotexnologiälär – Süzlek
    • ISO/TS 80004-1 Core terms
    • ISO/TS 80004-3 Carbon nano-objects
    • ISO/TS 80004-4 Nanostructured materials
    • ISO/TS 80004-5 Nano/bio interface
    • ISO/TS 80004-7 Diagnostics and therapeutics for healthcare

Şulay uq qarağız

үзгәртү

İskärmälär

үзгәртү

Tışqı sıltamalar

үзгәртү